dc 12c 24v 10a 10 amp solar panel charging controller for solar system
This is a compatible MPPT charge controller PWM intelligent/efficient/energy saving,he not only has efficient MPPT controllercharging function to automatically track the maximum power point10%-30%higher than the ordinary controller charging efficiency,also has standby energy saving,more than 30%energy than ordinary controller,the standby power consumption of only 15mA.MPPT is the maximum power point tracking;PWM is an intelligent charging mode.
Solar LCD series a kind of intelligent, multi-purpose solar charge and discharge controller.
| LCD screen display |
Battery reverse discharge protection |
| Easy operation interface |
Battery reverse polarity pretection |
| MPPT+PWM charging mode |
Battery under voltage protection |
| Parameter user can reset |
Overload, short-circuit protection |
| A key to opoen and close the load |
Automatic temperature compensation function |
| A key to restore the factory settings |
USB 5V charging (for 500mA) for mobile phone |
dc 12v 24v 10 amp 20 amp 30 amp rv mppt solar charge controller
/ 12 24 volt
solar panel and charge controller
Installation Instructions
1) Ready Qi installation tools and materials,and cable.Please matching suitable cable.
2) Ensure that the current density <4A/mm2 This willhelp reduce the line pressure drop.
Check the installation site meets the relevant safetyrequirements,avoid damp,dusty,flammable explosive and corrosive gases.
3) 3Install the controller fixed to the vertical plane,seeSection V mounting aperture and hole spacing.Inorder to ensure a good controller cooling conditions,the controller on the bottom of each reserved 10cm space.
4)As shown on the right wiring sequence:load,battery,solar Battery plate is connected to the controller to betaken to ensure that the load,battery,The polarity ofthe solar cell panel and controller.
5)Before use:external temperature sensor probeintthleft of the controller temperature probe interface probeplaced in similar battery temperature.(Line extensionmust be built-in devices of the external temperatureprobe coextensive Otherwise,the controller will controlparameters of the temperature compensation of the error.
6) Warning:In order to prevent accidents from occurring.install:non-professionals can not be engaged in loadingand unloading operations
| Model |
MPPT10 |
MPPT20 |
MPPT30 |
MPPT40 |
| Maximum power current |
10A |
20A |
30A |
40A |
| Weight |
280g |
300g |
475g |
480g |
| Dimension |
143*89*46mm |
187*97*61mm |
| Charge mode |
MPPT+PWM Mode |
| Maximum open circuit voltage of the solar panel |
18V-24V(12V System) 36V-48V(24V System) |
Product Details
Application for solar power system
Audited Supplier 
){kind=link}